Operation Manual

User manual
5
3. Remote Control
You can power on/off the receiver, operate on screen menu, and use a variety of hot key function.
POWER
To switch your receiver on from standby or standby to on.
MUTE
Used to enable or disable the audio
MENU
Displays the Main Menu on the screen, or return to the previous
menu or status
(PREVIOUS)
Return to the previous menu or status.
SAT
Display satellite list.
EXIT
Cancel the user selection and return to the viewing mode from a
menu.
( TV / RADIO)
Receiver switches between TV and Radio mode.
(INFORMATION)
To display channel status or various program information of current
service.
NUMERIC KEYS
Used to select channels or enter programming parameters
OK
To select menu option, or to updated on entry.
PAUSE
Used to select the freeze function.
Press once to freeze the screen picture.
Press again to go to normal state.
<,> KEY
To adjust volume level, or to move cursor left or right in the menu
^,v KEY
To change channels, or to move cursor up or down in the menu
FAV(FAVORITE)
To set receiver to the favorite server mode,
display the favorite channel
AUDIO
To select audio mode; Left, Right, Stereo
P+/P-
To move up the cursor to the next or previous page
in the menu or channel list
TV/SAT
Receiver switches between TV and Satellite receive mode.
(ZOOM)
Press
key select zoom times, from X1 to X16.
V
． MODE
Receiver switches between RGB and CVBS mode.
(WHITE KEY)
Subtitle Display.
Press timer key you can setup up the Standby time.
TIMER(YELLOW KEY)
Press timer key then enter timer menu. You can setup up total 8
tasks.
(RED KEY)
Audio channels setup, to select audio mode; Left, Right , Stereo.