Operation Manual

User manual
24
11.3 Default Value
Default Value:
When you press [OK] key In the “Default
Value” item:
1 There will pop a dialogue for you to enter
the password, and the default password is
“0000”.
2 After you input the correct password,
there will show a warning message to
inquiry you “The operation will load default
and erase all the channels that user
added, continue?”.
3 If you select “Yes” option, the all revised
parameters of the receiver will reset to
default value. Please carefully to using
this function.
4 In step 1 and step 2, press[Exit]key can
draw back from this item and without
saving.
Delete All Channel:
When you press [OK] key in the “Delete All
Channel” :
1 This message will be displayed, “Are you
sure to delete all?”. If you select “OK”, all
channels will be deleted.
2 After all channels are deleted, the STB will
return to the Tools menu.
? Frequently Asked Question
Q: IF I incautiously delete all channels,
what should I do?
A: there are two ways to restore:
 To re-search all channels in “Installation”
function.
 Use “Default Value” function to restore all
channels in “Tools” function.
11.4 Software Upgrade
Upgrade by RS232: