Operation Manual

User manual
19
 GMT Usage: This item is use for open the
usage of GMT. You can press [
◄,►] keys to
switch “On/Off”.
 The “GMT Offset” item is valid only when the
setting of “GMT Usage” is “Yes”. You can
press [
◄,►] keys to switch “GMT Offset”
value, and the range is “-12:00 ~ +12:00”,
increase each half hour progressively.
 You can press [Left/Right] to control Summer
time on or off.
 “Date” and “Time” items are valid only when
the setting of “GMT Usage” is “No”. You can
press [
◄,►] keys to moving highlight and use
number keys to input directly.
If the current channel provides the correct time
information, you will see the current time while
you enter “Time” menu. If the channel doesn’t
provide time information, you have to
input the
date and time information manually.
 Time Display can control time display on or
off when full screen play.
 Press [Exit]key to draw back from “Time”
menu.
10.4 Timer
Press [enter] key to open timer menu.
 Current time information will display on the
first column; if the current time is incorrect,
please modify the time information in “Time”
item.
 Timer Number: You can press [◄,►] keys to
set Timer number, and there are 8 timers in
total.
 Timer Mode: There are several modes for
Timer to setting, include Off, Once, Daily,
Weekly, Monthly and Yearly.
 Timer Service: There are two options for
“Timer Service”, include “TV Channel” and
“Radio Channel” (timer setting for channel
change and Wakeup/Sleep) and Message
(reminding message).
 When you select “Channel” (timer setting for
channel change and Wakeup/Sleep) option
in “Timer Service”, the screen will display like
below:
¾ Wakeup Channel: press [OK] key to
enter channel list and select channel
that you want to setting.
¾ Wakeup Date: use number keys to input
your wakeup date.
¾ On Time: use number keys to input your
wakeup time. Once the time’s up, no
matter what the system is in standby
mode or in playing mode, the system will
automatically switch to the channel you
want and start to play.
¾ Duration: After you set a time for
“Duration” item, once the time’s up, the
system will automatically switch to
standby mode. If you want not work this
function, set the duration is 00:00.
 When you select “Message” (reminding
message) option in “Timer Service”, the
screen will display like below: