Operation Manual

User manual
14
8.2 Radio Channel List
Basically, the operation of “Radio Channel
Manager” is same as “TV Channel Manager”,
but there is one point different: In “Radio
Channel Manager” mode, there is no video
information, so it will always display Radio’s
logo in the right side preview window.
9. Installation
When you enter to “Installation” menu, there will
display the screen like below:
9.1 Satellite
Satellite: Press[OK]key to enter the Satellite
list.
1 Press [OK] key to select satellite. Press
[▲,▼] key to page up or page down.
9.2 LNB type
In this item, press [◄,►] key can switch among
“Standard”, “User” and “Universal” mode.
For Example: If you use the Dual LNB, then you
should select “User” option in “LNB Type” and
set the correct frequency in LNB Type, then you
can play the channel normally.
9.3 DiSEqC 1.0
DiSEqC: You can use [◄,►] key to switch
options. There are several options for your
selection:
 Disable: without DiSEqC.
 1/2, 2/2: two ports DiSEqC
 1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC
9.4 DiSEqC 1.1
DiSEqC: You can use [◄,►] key to switch
options. There are several
options for your selection:
 Disable: without DiSEqC.
 1/8, 2/8… 8/8: 8 ports DiSEqC
 1/16, 2/16….16/16: 16 ports DiSEqC
9.5 Positioner