Operation Manual

User manual
12
three items will show up corresponding
parameters.
3 In “Name” item, press[OK]key can display
the keypad, and you can edit new name
here for selected channel.
4 In “Video PID”, “Audio PID” and “PCR PID”
items, you can use the number key directly
to modify corresponding parameters of the
items.
5 After modification, move highlight to “Save”
item and press[OK]key, can save
parameter and exit “Edit” mode. Otherwise,
move highlight to [Exit]item and
press[OK]key can exit “Edit” mode and
won’t save any modification.
8.1.3.3 Edit
If you press[YELLOW] key, it will show the
window like below:
1 On the “Name” item, press[OK]key can
display keypad to edit the name of selected
channel.
2 On the “Video PID”, “Audio PID” and “PCR
PID” items, you can input numerals to
modify the according item’s value.
3 After modification, move highlight to “Save”
item and press[OK]key can save the
modified value and exit “Edit” mode.
Otherwise, move highlight to [Exit]item and
press[OK]key can exit “Edit” mode and won’t
save any modification.
8.1.3.4 Lock
Press [BLUE] key can make a “lock mark” in
the right side of the highlighted channel.
After save and exit the menu, STB will
request you to input the password while you
want to watch the locked channel.
8.1.3.5 Move
1 In this menu, press [WHITE] key to
select the channels which you want move in
channel list, then press [OK] key to confirm, at
last press [▲,▼] keys to move.
2 Press [▲,▼] key to move the channel
3 Press [OK] key to put the channel to the
target place.
4 When exit the menu, it will ask you whether
to save the change. Select “Yes” to save the
change.
8.1.3.6 F1 Delete all
1 In this menu, press [F1] key can make all
delete mark in the right side of the current
channel
list.
2 Press [F1] key again can cancel the deleted
mark on the current channel
list.
3 When exit the menu, it will ask you whether
to save the change. Select “Yes” to save the
change.