Manualshelf

Operation Manual

ManualsBrandsSAB Heli Division ManualsMiscellaneousHead HPS3 - H0640-K
12
Approx 45 mm
11mm
Linkage Rod A Assembly . . . .x3
(Initial length for the rods from the
swashplate to the Blade Grip.)
Please read this user manual carefully, it contains instructions for the correct assembly of the KIT.
Please refer to the website www.goblin-helicopter.com for updates and other important information. Thanks You.
Blade Grip Linkage Assembly
Head Cap
Screw M2.5x15mm
(HC028-S)
Flanged Bearing
2.5x
6x2.5
(HC400-S)
Bushing
[H0599]
Blade Grip Linkage
(H0598-S)
Linkage Rod
(H0561-S)
Plastic Ball Link
(H0403-S)
Center Hub Assembly
Center Hub
(H0595-S)
Spindle
(H0596-S)
Uniball M2
(H0538-S)
Uniball M2
(H0538-S)
Uniball M2
(H0537-S)
Swashplate
Assembly
(H0600-S)
Swashplate Assembly
Blade Grip Assembly
Head Cap
Screw M2.5x8mm
(HC020-S)
Bearing
5x
10x4mm
(HC411-S)
Blade Grip Arm
(H0597-S)
Main Blade Grip
(H0513-S)
Washer
7.5x
10x0.5
(H0349-S)
Thrust Bearing
5x
10x4mm
(HC435-S)
Blade Grip Linkage
Assembly
Head Cap Screws
Shoulder M3x16mm
(HC074-S)
Nylon Nut M3
(HC206-S)
Nylon Nut M3
(HC206-S)
Head Cap Screws
Shoulder M3x18
(HC079-S)
Blade Grip
Assembly
C Washer
5x
7x0.2mm
(HC449-S)
[HC449-S]
[H0513-S][H0595-S]
Note
eg: Microlube GL261
HEX 2.5 Inside
Button Head Cap
Screw M4x6mm
(HC096-S)
Bearing
5x
10x4mm
(HC411-S)
A27_Rev 01
Page 1
HPS3 ROTOR HEAD
[
H0640-K
]

Summary of content (2 pages)