Operation Manual

B
C
A
Servo Spacer
(H0075-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
Tail Servo Assembly
The distance between the
axis and the ball must be
between 15-16 mm
Uniball
M2
5H6
(H0064-S) Tail Servo
Socket Head Cap
Screw M2.5x12mm
(HC026-S)
Tail Boom
Assembly
DETAIL A
Carbon Road
Support
(H0394-S)
DETAIL B
15-16mm
Carbon Road
Support B
(H0395-S)
Socket Head Cap
Screw M2.5x12mm
(HC026-S)
DETAIL C
Bag 15
Note: Lubricate this zone
Lock H0395, doing attention to the maximum
smoothness of the carbon road
Carbon Road
Assembly
(HC451-S)
Note:
* Install H0394 to the boom
* Insert carbon rod through the
boom making sure it is inserted
through H0394
* Install H0395 making sure to reduce
slop (side play) on the carbon rod
Page 28
Chapter 12, Tail