Operation Manual

- 1 x Yellow Tail Boom.
- 2 x Locking Element Tails.
- 2 x D ouble-Sided Tapes.
- 1 x Set Screws M3 x 20mm .
- 2 x Washers 3.1 x 12 x 1.8mm.
- 4 x Metric Hex Nylon Nuts M3 .
- 2 x Boom spacers.
- 2 x Socket Head Cap Screws M3 x 12mm .
- 2 x Nylon Screw M8x20mm.
- 1 x Flat Head Cap Screws M3x8mm .
Vertical ESC Support
[H0368-S]
- 1 x
Vertical ESC Support.
Landing Gear Mount Speed
[H0374-S]
- 1 x
Landing Gear Mount Speed.
- 2 x Socket Head Cap Screw
M3x10mm.
- 2 x Finishing Washer.
Yellow Canopy Speed
[H0367-S]
- 1 x
Landing Gear.
- 2 x Bottom Head Cap Screw M4x8mm.
- 2 x Bottom Head Cap Screw M4x10mm.
- 1 x Yellow and Orange Stickers.
Main Frame
[H0354-S]
1 x Main Frame
- 1 x Canopy Yellow.
- 2 x Canopy Grommet.
- 1 x Canopy Mousse.
- 1 x Canopy Edge Protection.
- 2 x Vertical ESC Support.
- 1 x ESC Support.
- 2 x Frame Spacer.
- 4 x Flat Head Socket Cap M3x5mm.
- 6 x Finishing Washer M3.
- 6 x Socket Head Cap Screws M3 x 10mm .
- 2 x Flat Head Cap Screws M3x8mm .
Landing Gear Support
[H0374-S]
- 1 x Landing Gear Support
Yellow Landing Gear
[H0375-S]
Canopy Locking
[H0378-S]
- 2 x Canopy Locking.
- 2 x Button Head Socket Cap
M4x8mm.
Orange Canopy Speed
[H0382-S]
- 1 x Canopy Arange.
- 2 x Canopy Grommet.
- 1 x Canopy Mousse.
- 1 x Canopy Edge Protection.
Orange Tail Boom
[H0383-S]
- 1 x Orange Tail Boom.
- 2 x Locking Element Tails.
- 2 x D ouble-Sided Tapes.
- 1 x Set Screws M3 x 20mm .
- 2 x Washers 3.1 x 12 x 1.8mm.
- 4 x Metric Hex Nylon Nuts M3 .
- 2 x Boom spacers.
- 2 x Socket Head Cap Screws M3 x 12mm .
- 2 x Nylon Screw M8x20mm.
- 1 x Flat Head Cap Screws M3x8mm .
Safety Landing Gear
[H0379-S]
- 1 x
Landing Gear.
- 2 x Bottom Head Cap Screw M4x8mm.
- 2 x Bottom Head Cap Screw M4x10mm.
- 1 x Yellow and Orange Stickers.
- 1 x Tail Spilde Shaft.
- 2 x Button Head Socket Cap
Screw M4x6mm.
Tail Spilde Shaft
[H0329-S]
- 2 x Linkage HPS.
- 4 x Plastic Ball Link.
- 2 x Linkage Rod.
Linkage HPS V2
[H0346-S]
- 1 x Canopy Yellow/Orange.
- 1 x Canopy Grommet.
- 1 x Canopy mousse.
- 1 x Canopy Edge Protection.
Canopy Yellow/Orange.
[H0356-S]
Canopy Yellow/Green.
[H0357-S]
- 1 x Canopy Yellow/Green.
- 1 x Canopy Grommet.
- 1 x Canopy mousse.
- 1 x Canopy Edge Protection.
- 1 x Tail Boom Support.
- 1 x Nylon screw M8x20mm.
- 1 x Flat Head Socket Cap M3x8mm.
Tail Boom Support
[H0358-S]
- 1 x Aluminum Tail Side Plate.
- 1 x Flanged bearing Ø6xØ13x5mm.
Aluminum Tail Side Plate
[H0359-S]
Spacer Set For Tail Rotor
[H0330-S]
Tail Boom Support
[H0358-S]
- 1 x Tail Boom Support.
- 1 x Nylon screw M8x20mm.
- 1 x Flat Head Socket Cap
M3x8mm.
Vertical Fin
[H0371-S]
- 1 x
Vertical Fin
.
- 1 x
Small Vertical Fin
.
- 6 x Socket Head Cap M3x8mm.
- 2 x Finishing Washer M3.
- 2 x Socket Head Cap M3x12mm.
- 1 x Yellow and Orange Stickers.
Tail Side Plate
[H0373-S]
- 1 x Tail Side Plate.
- 2 x Finishing Washer M3.
- 2 x Socket Head Cap M3x12mm.
- 2 x Washer
Ø5xØ8.9x0,75mm.
- 2 x Washer
Ø7.5xØ10x0,5mm.
- 2 x Tail Oring Damperner.
19T Drive Pinion
[H0361-S]
- 1 x 19T Drive Pinion.
- 1 x Socket Head Cap Screw
Shouldered M3x22mm.
- 1 x Metric Hex Nylon Nut M3H4.
YELLOW Tail Boom
[H0366-S]
Copyright © 2013 - SAB Heli Division - All rights reserved
Page 41
Chapter 18, Spare Parts