Operation Manual
Main Frame
[H0354-S]
- 1 x Main Frame.
Yellow Tail Boom
[H0355-S]
- 1 x Yellow Tail Boom.
- 2 x Locking Element Tails.
- 2 x D
ouble-Sided Tapes.
- 1 x
Set Screws M3 x 20mm
.
- 2 x Washers 3.1 x 12 x 1.8mm.
- 4 x
Metric Hex Nylon Nuts M3
.
- 2 x Boom spacers.
- 2 x
Socket Head Cap Screws M3 x 12mm
.
- 2 x Nylon Screw M8x20mm.
- 1 x
Flat Head Cap Screws M3x8mm
.
- 1 x 20T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x 23T Pulley.
- 1 x Set Screws M4x4mm.
23T Pulley
[H0175-23-S]
- 1 x 22T Pulley.
- 1 x Set Screws M4x4mm.
22T Pulley
[H0175-22-S]
- 1 x 21T Pulley.
- 1 x Set Screws M4x4mm.
21T Pulley
[H0175-21-S]
20T Pulley
[H0175-20-S]
- 1 x 24T Pulley.
- 1 x Set Screws M4x4mm.
24T Pulley
[H0175-24-S]
Blade Grip
[H0182-S]
- 2 x Blade Grip.
- 2 x
Thrust Bearing
10x
18x5.5mm.
- 4 x
Bearing
10x
19x5mm.
- 2 x Washer
10x
16x1mm.
- 2 x Button Head Socket Cap
M4x10mm.
Blade Grip Arm
[H0183-S]
- 2 x Blade Grip Arm.
- 2 x Socket Head Cap Screw
M4x10mm.
- 2 x Uniball M3x4 Ø5 H3.5.
- 1 x Plastic Tail Linkage.
- 1 x Grip Link Bushing.
- 1 x Socket Head Cap Screws
M2x6mm.
Plastic Tail Linkage
[H0261-S]
Quick Release Canopy Mount
[H0319-S]
- 2 x Quick Release Canopy Assembly.
- 2 x Flat Head Socket Cap M3x8mm.
- 2 x Canopy Grommets.
Steel Tail Shaft
[H0325-S]
- 1 x Steel Tail Shaft Assembly.
- 1 x Tail Oring Damperner.
- 2 x Aluminum Tail Blade Grip.
- 4 x Bearing Ø5xØ10x4mm.
- 2 x Thrust bearing Ø5xØ10x4mm.
- 2 x Button Head Cap M4x8mm.
- 2 x Socket Head Cap M2x6mm.
- 2 x Washer Ø5xØ8.9x0,75mm.
- 2 x Washer Ø7.5xØ10x0,5mm.
Aluminum Tail Blade Grip
[H0327-S]
- 1 x Tail Spilde Shaft
- 2 x Button Head Socket
Cap M4x6mm.
Tail Spilde Shaft
[H0329-S]
- 2 x Washer Ø5xØ8.9x0,75mm.
- 2 x Washer Ø7.5xØ10x0,5mm.
- 2 x Tail Oring Damperner.
Spacer Set For Tail Rotor
[H0330-S]
- 2 x Linkage HPS.
- 4 x Plastic Ball Link.
- 2 x Linkage Rod.
Linkage HPS V2
[H0346-S]
- 1 x Canopy Yellow/Orange.
- 1 x Canopy Grommet.
- 1 x Canopy mousse.
- 1 x Canopy Edge Protection.
Canopy Yellow/Orange.
[H0356-S]
Canopy Yellow/Green.
[H0357-S]
- 1 x Canopy Yellow/Green.
- 1 x Canopy Grommet.
- 1 x Canopy mousse.
- 1 x Canopy Edge Protection.
- 1 x Tail Boom Support.
- 1 x Nylon screw M8x20mm.
- 1 x Flat Head Socket Cap M3x8mm.
Tail Boom Support
[H0358-S]
- 1 x Aluminum Tail Side Plate.
- 1 x Flanged bearing Ø6xØ13x5mm.
Aluminum Tail Side Plate
[H0359-S]
Copyright@2012 - SAB Heli Division - All rights reserved
Page 41
Chapter 18, Spare Parts