Operation Manual
Stop Battery Tray
[H0150-S]
- 1 x Stop Battery Tray.
- 2 x Socket Head Cap
Screw M2.5x8mm.
- 1 x Column Belt Tensioner.
- 1 x Tail Belt Idler.
- 1 x Belt Tensioner Arm.
- 2 x Flanged Bearings
3x
7x3mm.
- 2 x Flanged Bearings
5x
9x3mm.
- 1 x Socket Head Cap Screw M3x50mm.
- 1 x Washer
3x
4x0.5mm.
- 1 x Socket Head Cap Screw M3x12mm.
- 2 x Washers
3.2x
6x0.5mm.
- 1 x Button Head Cap Screw M3x4mm.
- 1 x Spring De8/df0.5/LL8.
1 x Block Nut.
1 x Flat Head Cap Screw M3x8.
Block Nut
[H0358-S]
1x Tail Upper Case
Tail Upper Case
[H0360-S]
- 1 x Red Vertical Fin.
- 2 x Socket Head Cap
Screws M3x12mm.
- 2 x Finishing Washers M3.
Red Vertical Fin
[H0117-S]
- 1 x Battery Plate.
- 1 x Battery Protection.
- 2 x Cylinder M2.5.
- 2 x Flat Head Cap Screw
M2.5x5mm
- 1 x Heat Shrink.
- 4 x Landing Gear Struts.
- 4 x Button Head Cap Screws
M4x6mm.
- 4 x Button Head Cap Screws
M4x10mm.
- 10 x Washers
3.1x
12x1.8mm.
Washer
3.1x
12x1.8mm
[H0078-S]
Servo Spacer
[H0075-S]
Landing Gear Struts
[H0074-S]
Belt Tensioner Support
[H0174-S]
- 5 x Uniballs M3x4
5H3.5.
Uniball M3x4
5H3
[H0065-S]
- 4 x Spacers
3x
4x0.5mm
Bell Crank Lever
[H0059-S]
- 1 x Tail Rotor Hub.
Tail Rotor Hub
[H0326-S]
Antenna Guide
[H0050-S]
- 1 x 27T Tail Pulley.
- 1 x Set Screw M4x4mm.
- 6 x Socket Head Cap Screws
M2x5mm.
27T Tail Pulley
[H0102-S]
- 1 x 26T Tail Pulley.
- 1 x Set Screw M4x4mm.
- 6 x Socket Head Cap
Screws M2x5mm.
26T Tail Pulley
[H0103-S]
Tail Rotor Shaft
[H0325-S]
- 1 x Tail Side Plate.
- 2 x Socket Head Cap
Screws M3x12mm.
- 2 x Finishing Washers M3.
- 1 x Linkage Tail Support.
- 2 x Socket Head Cap
Screws M2.5x6mm.
Linkage Tail Support
[H0045-S]
- 3 x Spacer Flybarless.
- 1 x Supporto Flybarless.
- 1 x Flat Head Cap Screw
M3x8mm.
- 5 x Socket Head Cap Screws
M3x6mm.
Battery Tray
[H0149-S]
Plastic Ball Link
[H0066-S]
Uniball M3x4
5H18
[H0063-S]
- 1 x Uniball M3x4
5H18
Uniball M2
5H6
[H0064-S]
Spacer
7x
9x0.5mm
[H0062-S]
- 1 x Bell Crank Base.
Bell Crank Base
[H0058-S]
- 2 x Grips Link.
- 2 x Grip Link Bush.
- 2 x Socket Head Cap
Screws M2x6mm.
Grip Link
[H0056-S]
- 1 x Tail Pitch Slider 01.
- 1 x Tail Pitch Slider 02.
- 1 x Tail Pitch Slider 03.
- 1 x Spacer
8x
9x3.2mm.
- 1 x Uniball M3x4
5H3.
- 2 x Flanged Bearings
8x
12x3.5mm
- 2 x Tail Blade Grips.
- 2 x Bottom Head Cap Screws
M4x8mm.
- 4 x Bearings
5x
10x4mm.
- 2 x Antenna Guide.
- 2 x Button Head Cap
Screws M3x4mm.
Tail Side Plate
[H0359-S]
- 1 x Yellow Vertical Fin.
- 2 x Socket Head Cap Screws
M3x12mm.
- 2 x Finishing Washers M3.
-10 x Servo Spacers.
Tail Case Spacer
[H0061-S]
- 2 x Tail Case Spacers.
- 4 x Socket Head Cap
Screws M3x8mm.
- 5 x Uniballs M2
5H6.
- 5 x Uniball Spacers.
- 5 x Socket Head Cap
Screws M2x8mm.
- 5 x Socket Head Cap
Screws M2x6mm.
- 1 x Bell Crank Lever.
- 1 x Bush Bell Crank.
- 1 x Washer
3x
4x0.5mm.
- 1 x Spacer
3x
4x9.6mm.
- 1 x Socket Head Cap Screw
M3x22mm.
- 2 x Flanged Bearings
3x
7x3mm.
Tail Pitch Slider
[H0053-S]
Tail Blade Grip
[H0327-S]
- 1 x Tail Rotor Shaft.
- 2 x Set Screws M4x4mm.
Yellow Vertical Fin
[H0046-S]
Spacer Flybarless
[H0043-S]
10 x Plastic Ball Link
Spindle
[H0079-S]
- 1 x Spindle.
- 2 x Button Head Cap Screw
M6x10mm.
- 2 x
Washer
6x
14x1.5mm
Boom Spacer
[H0082-S]
- 2 x Boom Spacer.
- 1 x
Set Screw M3x20mm
- 1 x ESC Support.
- 2 x Frame Spacer.
- 4 x Flat Head Cap Screws
M2.5x5mm.
ESC Support
[H0088-S]
- 1 x CF Yellow Landing Gear.
Yellow Landing Gear
[H0106-S]
Bush One Way
[H0110-S]
- 4 x Bush One Ways.
M4 Locking Collar
[H0121-S]
- 1 x M4 Locking Collar.
- 1 x Socket Head Cap Screw
M4x22mm.
- 1 x Metric Hex Nylon Nut M4 H5.
- 1 x Main Shaft.
- 1 x M4 Locking Collar
- 1 x Socket Head Cap Screw
Shouldered M4x24mm.
- 2 x Socket Head Cap Screws
M4x22mm.
- 3 x Metric Hex Nylon Nuts M4 H5.
Main Shaft
[H0122-S]
Radius Arm
[H0132-S]
-2 x Radius Arms.
-2 x Spacer Arm
3x
5x2.7mm.
-2 x Spacer Arm
2.5x
4x6.3mm.
-2 x Uniball Radius Arms.
-2 x Socket Head Cap Screws M3x16mm.
-2 x Socket Head Cap Screws M2.5x18mm.
-2 x Washers
3x
4x0.5mm.
-2 x Flanged Bearings
2.5x
6x2.5mm.
-2 x Flanged Bearings
3x
7x3mm.
Copyright@2012 - SAB Heli Division - All rights reserved
Page 39
Chapter 18, Spare Parts