Operation Manual

BATTERIES
To secure the batteries, use the supplied O-rings HA012 [ Bag 14 ].
Install them as shown in figure 1
To correctly secure the batteries it is necessary to use hook and loop type tape on the battery support and batteries themselves
( figure 2 ).
CANOPY
On the Goblin, the canopy touches the frame. To avoid triggering vibration, it is necessary to
attach an adhesive foam tape to the canopy HA006 [Bag 14] ( figure 3 ).
The canopy is locked at the point shown in figure 4 and with two H0036 knobs (both equipped
with OR HA008 [Bag 14]( figure 5 )). Confirm the canopy is secure prior to each flight.
Copyright@2012 - SAB Heli Division - All rights reserved
Page 32
Chapter 14, Canopy and Battery