Operation Manual

Uniball
M3H3
(H0065-S)
Uniball
M3H3
(H0065-S)
Tray 1, Bags 5.5, 5.6
Set Screw
M2.5x15mm
(HC146-S)
Linkage Rod B Assembly . . . ..x3
(Initial length for the rods from the servos to the swash plate.)
(Initial length for the rods from the swash plate to the Blade Grip.)
Linkage Rod A Assembly . . . .x2
Approx. 62.5mm
Linkage Rod M2.5x33mm
(H0237-S)
Plastic Ball Link
(H0066-S)
Linkage Rod B
Assembly
Linkage Rod A
Assembly
Head Cap Screw
Shouldered M3x20
(HC082-S)
Metric Hex Nylon
Nut M3
(HC206-S)
Approx. 44mm
Swashplate
Assemly
Plastic Ball Link
(H0066-S)
Approx
53.5mm
Preliminary Head Setup
Adjust the linkages as shown. You can change the tracking
without disconnecting the plastic ball links by inserting a
small tool through the rod hole and turning it.
Left Thread
Right Thread
Socket Head Cap
Screw M3x12mm
(HC062-S)
Approx.
35mm
Head System
Assembly
Uniball
M3H18
(H0063-S)
Swashplate Assemly
Page 15
Chapter 8, Assembling The Modules