Raw 700 Manual

- 1 x Wire Cover.
- 1 x Finishing Washer M3.
- 1 x Head Cap Screws M3x8mm.
- 2 x Button Cap Screws M2.5x6mm.
Wire Cover
[H1107-S]
- 1 x Tail Pitch Slider Assembled.
- 2 x Slider Linkage.
- 2 x Head Cap Screws M2x6mm.
- 2 x Spacer.
Tail Pitch Slider
[H1112-S]
- 2 x Tail Slider Bush.
Tail Slider Bush
[H1115-S]
FBL/RX Support
[H1268-S]
- 1 x Rear Servo Support.
- 2 x Socket Head Cap M3x8mm.
Rear Servo Support
[H1206-S]
Rear Servo Mount
[H1207-S]
- 1 x Rear Servo Mount.
- 2 x Socket Head Cap M2.5x8mm.
- 1 x Alu FBL Support.
- 1 x RX Support.
- 4 x Rubber.
- 4 x Flat Head Cap Screw M3x5mm.
- 3 x Socket Head Cap Screw M3x6.
Front Tail Pulley 34T
[H1271-S]
- 1 x Front Tail Pulley 34T.
- 1 x Head Shoulder M4x22mm.
- 1 x Nylon Nut M4.
Swashplate Reference
[H1273-S]
- 1 x Swashplate reference.
- 2 x Head Cap Screws M3x8mm.
Kraken Serial Number
[H1108-S]
- 1 x Kraken Serial Number.
- 1 x Flat Head Cap Screw M2.5x5.
Antenna Support
[H1134-S]
- 1 x Antenna Support.
- 1 x Double Side Tape.
Tail Case Group
[H1195-S]
- 1 x Tail Case Group.
- 4 x Finishing Washer M3.
- 4 x Socket Head Cap Screw M3x6.
- 2 x Flanged Bearing
6x 13x5 .
Tail Fin
[H1196-S]
- 1 x Tail Fin.
- 2 x Sticker.
- 2 x Socket Head Cap Screw M3x8.
Carbon Rod Support
[H1197-S]
- 1 x Carbon Rod Support.
- 1 x Socket Head Cap Screw M2.5x12.
Landing Gear Spacer
[H1236-S]
- 4 x Landing Gear Spacer.
- 4 x Double Side Tape.
TOP Main Case
[H1266-S]
- 1 x Main Case.
- 1 x Buttom Head Cap Screw M4x6.
- 5 x Socket Head Cap Screw M3x12.
- 2 x Flanged Bearing
8x 16x5 .
Main Structure
[H1267-S]
- 1 x Main Structure.
- 2 x Pin 3x8.
- 1 x Bearing
12x 24x6mm.
- 1 x Bearing
12x 24x6 2RS.
Pinion
[H1269-S]
- 1 x Pinion.
Main Gear
[H1276-S]
- 1 x Main Gear SET.
- 1 x Head Cap Screws M4x22mm.
Base Tail Belt Tensioner
[H1278-S]
- 1 x Bushing.
- 1 x Base Tail Belt Tensioner.
- 1 x Tensioner Column.
- 1 x Tensioner Spring.
- 1 x Head Screw Shoulder M3x22.
- 2 x Flanged Bearing
3x 7x3 .
Page 43
SPARE PARTS