Raw 700 Manual

1558mm
345mm
1435mm
Typical Motor : 12S, 500-560 Kv, 4525 - 4530 series,
(max 62 mm diameter, max 70 mm height).
Typical Speed Controller: 12S, 160/200 A
Battery compartment: 12S, 4200/5500 mAh.
(max 56mmx60mmx320mm).
Suggested weight from 1400gr to 1800gr.
190mm
• AIRFRAME weight: 2620gr (with blades, nobattery, no electronics).
• Main rotor diameter: 1558 mm (with 690 mm blades).
• Main blade length: 650 to 730mm.
• Tail rotor diameter: 284 mm (with 105 mm tail blades).
• Tail blade length: 105 to 115 mm.
GOBLIN RAW TECHNICAL SPECIFICATIONS
• Cyclic Servos: Standard size 40mm.
• Tail Servo: Standard size 40mm.
• Main Rotor Ratio : 11.8 to 8.8 ( 21T included: 10.1:1).
• Tail Rotor Ratio : 5.0-4.8:1 ( 26T included: 4.9:1 ).
• 690 mm main blades.
• 105 mm tail blades.
Minimum tail blades size: 105mm
Maximum tail blades size: 115mm
KIT Includes:
• 21T motor pulley (other pulley sizes available).
• 2 battery trays with straps.
Page 2
INTRODUCTION