Raw 700 Manual
Table Of Contents
- page0_DE.PDF
- page1_DE.PDF
- page2_DE.PDF
- page3_DE.PDF
- page4_DE.PDF
- page5_DE.PDF
- page6_DE.PDF
- page7_DE.PDF
- page8_DE.PDF
- page9_DE.PDF
- page10_DE.PDF
- page11_DE.PDF
- page12_DE.PDF
- page13_DE.PDF
- page14_DE.PDF
- page15_DE.PDF
- page16_DE.PDF
- page17_DE.PDF
- page18_DE.PDF
- page19_DE.PDF
- page20_DE.PDF
- page21_DE.PDF
- page22_DE.PDF
- page23_DE.PDF
- page24_DE.PDF
- page25_DE.PDF
- page26_DE.PDF
- page27_DE.PDF
- page28_DE.PDF
- page29_DE.PDF
- page30_DE.PDF
- page31_DE.PDF
- page32_DE.PDF
- page33_DE.PDF
- page34_DE.PDF
- page35_DE.PDF
- page36_DE.PDF
- page37_DE.PDF
- page38_DE.PDF
- page39_DE.PDF
- page40_DE.PDF
- page41_DE.PDF
- page42_DE.PDF
- page43_DE.PDF
- page44_DE.PDF
- page45_DE.PDF
- Sheet1
- Drawing View1
- Drawing View2
- Drawing View4
- Drawing View5
- Drawing View6
- Drawing View8
- Drawing View9
- Drawing View10
- Drawing View11
- Drawing View12
- Drawing View13
- Drawing View14
- Drawing View15
- Drawing View16
- Drawing View17
- Drawing View18
- Drawing View19
- Drawing View20
- Drawing View21
- Drawing View22
- Drawing View23
- Drawing View24
- Drawing View25
- Drawing View26
- Drawing View27
- Drawing View28
- Drawing View29
- Drawing View30
- Drawing View31
- Drawing View32
- Drawing View33
- Drawing View34
- Drawing View35
- Drawing View36
- Drawing View37
- Sheet1
- page46_DE.PDF
- Sheet1
- Drawing View37
- Drawing View38
- Drawing View39
- Drawing View40
- Drawing View41
- Drawing View42
- Drawing View45
- Drawing View46
- Drawing View56
- Drawing View58
- Drawing View59
- Drawing View60
- Drawing View61
- Drawing View63
- Drawing View65
- Drawing View71
- Drawing View73
- Drawing View75
- Drawing View78
- Drawing View81
- Drawing View82
- Drawing View83
- Drawing View89
- Drawing View91
- Drawing View93
- Drawing View94
- Drawing View95
- Drawing View96
- Drawing View105
- Drawing View110
- Drawing View111
- Drawing View113
- Drawing View115
- Drawing View116
- Sheet1
- page47_DE.PDF
40mm
CF ESC Mount
(H1362-S)
Plastic ESC Support
(H1068-S)
Motor Pulley 21T
(H0175-21-S)
Motor Mount
(H1058-S)
Motor Bushing
(H0176-S)
Use with 6mm
motor shaft
Metric Hex
Nylon Nut M5
(HC218-S)
Washer
5.3x
15x1mm
(HC188-S)
Flat Head Cap
Screw M3x10mm
(HC135-S)
Socket Head Cap
Screw M3x10mm
(HC056-S)
Flat Head Cap
Screw M4x6mm
(HC351-S)
Socket Head Cap
Screw M3x8mm
(HC050-S)
Use set Screw M4x4mm or M4x6mm
in according with motor pulley/shaft
(HC152-S)/(HC153-S)
The set screw must be below the
surface of the teeth.
3
rd
bearing support for the motor, H0143-S
Install the support after mounting the motor
and installing the pulley.
H0143 does not need to be used with an 8mm
motor shaft.
Box 3, Bag for page 21
NOTE:
Motor wires pointing forward.
Socket Head Cap
Screw M3x6mm
(HC044-S)
Max height of the motor shaft:
Page 21
INSTALLATION OF THE MOTOR/ESC