Kraken 580 Nitro Manual

- 1 x Canopy Kraken 580.
- 2 x Canopy Grommet.
Canopy Kraken 580
[H1381-S]
- 1 x Tail Boom Kraken 580.
- 2 x Locking Element Tail.
- 4 x Metric Hex Nylon Nuts M3.
Tail Boom Kraken 580
[H1382-S]
- 2 x Double Sided Tapes.
- 1 x Nut Block.
- 4 x Socket Head Cap Screws M3x10mm.
- 4 x Finishing Washer M3.
Tail Blade Grips
[H1233-S]
- 2 x Tail Blade Grip.
- 4 x Bearing
4x 9x2.5mm.
- 2 x Spacer
7x 9x0.5mm.
- 2 x Thrust Bearing
4x 9x4mm.
- 2 x Socket Head Cap Screw M3x6mm.
- 2 x Socket Head Cap Screw M2x6mm.
- 1 x Alu FBL Support.
- 1 x FBL Plate Mount.
- 4 x Head Cap Screws M2.5x8.
- 4 x Finishing Washer M2.5.
- 4 x Flat Screws M3x5mm.
- 4 x Rubber Column.
FBL Support
[H1237-S]
- 2 x Landing Gear Rod.
- 4 x Plug.
Landing Gear Rod
[H1242-S]
Tail Side Plate
[H1240-S]
- 1 x Tail Side Plate.
- 1 x Flanged Bearing
5x 13x4mm.
- 1 x Tail Case Spacer.
- 2 x Head Cap Screws M2.5x6mm.
- 2 x Head Cap Screws M2.5x8mm.
Tail Case Spacer
[H1239-S]
- 1 x Tail Fin.
- 1 x Orange Stickers.
- 1 x Green Stickers.
- 1 x Yellow Stickers.
- 1 x White Stickers.
- 1 x Red Stickers.
Tail Fin
[H1243-S]
- 1 x Bell Crank Lever Assembled.
- 1 x Head Cap Screws M2.5x18mm.
- 1 x Head Cap Screws M2x6mm.
- 1 x Uniball M2.
- 1 x Uniball M3.
Tail Bell Crank Lever
[H1248-S]
- 1 x Tail Pitch Slider Assembled.
- 1 x Tail Pulley 23T.
- 1 x Set Screw M3x8mm.
- 4 x Head Cap Screws M2x12mm.
Tail Pulley
[H1272-S]
Rear Servo Mount 35mm
[H1262-S]
- 1 x Rear Servo Mount 35mm.
- 2 x Socket Head Cap M2.5x8mm.
- 1 x Front Servo Mount 35mm.
- 3 x Head Cap Screws M2.5x8mm.
Front Servo Mount 35mm
[H1261-S]
Tail Pitch Slider
[H1249-S]
Main Frame
[H1281-S]
- 1 x Main Frame.
Tank
[H1282-S]
- 1 x Tank.
- 4 x Tank Rubber.
- 2 x Bushing.
- 4 x Tank column mount.
- 2 x Set Screw M3x20mm.
Engine Support Spacer
[H1286-S]
- 2 x Engine Support Spacer.
- 4 x Flat Head Cap Screw M3x8mm.
Tank Column Mount
[H1283-S]
Engine Support SX
[H1284-S]
- 1 x Engine support SX.
Engine Support DX
[H1285-S]
- 1 x Engine support DX.
Page 43
SPARE PARTS