Kraken 580 Nitro Manual

- 2 x Blade Grip.
- 2 x Thrust Bearing
8x 14x4mm.
- 4 x Bearing
8x 14x4mm.
- 2 x Washer
11x 13.5x0.5mm.
- 2 x Socket Head Cap M4x10mm.
Main Blade Grips
[H1368-S]
Swashplate
[H1204-S]
Main Pulley
[H1213-S]
- 1 x Swashplate Assembly.
- 7 x Uniball M3.
- 1 x Reference Pin.
- 1 x Main Pulley 50T.
- 1 x One Way Bearing
10x 14x12.
- 2 x Ball Bearing
10x 15x4mm.
- 1 x Bushing
10x 13x1.5.
- 1 x Wire Cover.
- 1 x Finishing Washer M3.
- 1 x Head Cap Screws M3x8mm.
- 2 x Button Cap Screws M2.5x6mm.
Wire Cover
[H1107-S]
- 2 x SAB Fuel Stop.
- 2 x SAB T connector.
SAB Fuel Stop
[H0715-S]
Rear Servo Support
[H1206-S]
- 1 x Rear Servo Support.
- 2 x Socket Head Cap M3x8mm.
Front Tail Pulley
[H1214-S]
- 1 x Front Tail Pulley.
- 1 x Socket Head Cap
Shoulder M3x18mm.
Damper
[H1216-S]
- 2 x Damper A.
- 2 x Damper B.
- 2 x Damper C.
Boom Connetion
[H1224-S]
- 1 x Boom Connetion.
- 4 x Head Cap Screws M3x10mm.
- 4 x Shim
8x 14x0.2mm.
- 4 x Oring 70
.
- 4 x Oring 90
.
- 2 x Quick Release Canopy.
- 2 x Socket Head Cap Screw M3x6 .
Quick Release Canopy
[H1101-S]
Reference Pin
[H1048-S]
- 1 x Reference Pin.
Pulley Z26-Z28
[H0675-26-27-28-S]
Engine Frame Spacer
[H0678-S]
SAB Fuel Clunk
[H0705-S]
SAB Fuel Nipple
[H0708-S]
- 1 x Pulley Z26-Z28
- 3 x Radial Bearing 12x18x4mm.
- 1 x Pulley Washer.
- 4 x Engine Frame Spacer
- 4 x Buttom Head Cap Screw M3x6.
- 1 x SAB Fuel Clunk.
- 2 x SAB Fuel Clunk Filter.
- 1 x SAB Fuel Tube 2,5x4,5 - 8,5cm.
- 1 x SAB Fuel Nipple.
- 2 x SAB Tank Grommet.
- 1 x Center Hub.
- 1 x Socket Head Cap M4x20mm.
- 2 x Socket Head Cap M2.5x12mm.
- 1 x Nylon Nut M4.
Center Hub
[H1200-S]
- 1 x Canopy Front Block.
- 4 x Selft Tapping Screws M3x10mm.
Canopy Front Block
[H1227-S]
- 1 x Plastic Landing Gear Support.
- 2 x Set Screws M4x4mm.
Plastic Landing Gear Support
[H1226-S]
Page 42
SPARE PARTS