Kraken 580 Manual

- 1 x Canopy Kraken 580.
- 2 x Canopy Grommet.
Canopy Kraken 580
[H1231-S]
- 1 x Tail Boom Kraken 580.
- 2 x Locking Element Tail.
- 4 x Metric Hex Nylon Nuts M3.
Tail Boom Kraken 580
[H1232-S]
- 1 x Canopy Front Block.
- 4 x Selft Tapping Screws M3x10mm.
Canopy Front Block
[H1227-S]
- 2 x Double Sided Tapes.
- 1 x Nut Block.
- 4 x Socket Head Cap Screws M3x10mm.
- 4 x Finishing Washer M3.
- 1 x Plastic Landing Gear Support.
- 2 x Set Screws M4x4mm.
Plastic Landing Gear Support
[H1226-S]
Low Side Frame SX
[H1229-S]
Low Side Frame DX
[H1230-S]
- 1 x Low Side Frame SX.
- 1 x Low Side Frame DX.
ESC Support
[H1228-S]
- 1 x Plastic ESC Support.
- 1 x CF ESC Plate.
- 2 x Flat Cap Screw M3x8mm.
- 2 x Socket Head Cap M3x10mm.
- 4 x Ny Lon Nut M3.
Tail Blade Grips
[H1233-S]
- 2 x Tail Blade Grip.
- 4 x Bearing
4x 9x2.5mm.
- 2 x Spacer
7x 9x0.5mm.
- 2 x Thrust Bearing
4x 9x4mm.
- 2 x Socket Head Cap Screw M3x6mm.
- 2 x Socket Head Cap Screw M2x6mm.
- 1 x Alu FBL Support.
- 1 x FBL Plate Mount.
- 4 x Head Cap Screws M2.5x8.
- 4 x Finishing Washer M2.5.
- 4 x Flat Screws M3x5mm.
- 4 x Rubber Column.
FBL Support
[H1237-S]
- 2 x Landing Gear Rod.
- 4 x Plug.
Landing Gear Rod
[H1242-S]
Tail Side Plate
[H1240-S]
- 1 x Tail Side Plate.
- 1 x Flanged Bearing
5x 13x4mm.
- 1 x Tail Case Spacer.
- 4 x Head Cap Screws M2.5x6mm.
Tail Case Spacer
[H1239-S]
- 1 x Yellow Stickers.
- 1 x White Stickers.
- 1 x Tail Fin.
- 1 x Orange Stickers.
- 1 x Green Stickers.
Tail Fin
[H1243-S]
- 2 x Low Side Frame Mount.
- 2 x Socket Head Cap M2.5x8mm.
- 1 x Bell Crank Lever Assembled.
- 1 x Head Cap Screws M2.5x18mm.
- 1 x Head Cap Screws M2x6mm.
- 1 x Uniball M2.
- 1 x Uniball M3.
Tail Bell Crank Lever
[H1248-S]
Low Side Frame Mount
[H1246-S]
- 1 x Tail Pitch Slider Assembled.
Tail Pitch Slider
[H1249-S]
Page 43
SPARE PARTS