Kraken 580 Manual

- 10 x Plastic Ball Link.
Plastic Ball Link
[H0066-S]
- 5 x Uniballs M3x4 5H3.5.
Uniball M3x4 5H3
[H0065-S]
- 5 x Uniballs M2 5H6.
- 5 x Uniball Spacers.
- 5 x Head Cap Screws M2x8mm.
- 5 x Head Cap Screws M2x6mm.
Uniball M2 5H6
[H0064-S]
- 2 x Tail Servo Locks.
- 2 x Servo Spacers.
- 4 x Head Cap Screws M2.5x12mm.
Tail Servo Lock
[H0040-S]
- 10 x Finishing Washers M3.
Finishing Washer M3
[H0007-S]
- 10 x Servo Spacers.
Servo Spacer
[H0075-S]
- 2 x Plastic Tail Linkage.
- 2 x Grip Link Bushing.
- 2 x Head Cap Screws M2x6mm.
Plastic Tail Linkage
[H0261-S]
- 10 x Finishing Washer M2.5.
Finishing Washer M2.5
[H0255-S]
- 1 x Tail Spindle.
- 2 x Socket Cap Screws M3x6mm.
Main Spindle
[H0213-S]
- 1 x Tail Spindle.
- 2 x Button Cap Screws M6x10mm.
- 2 x Washer.
Tail Spindle
[H0220-S]
Tail Spindle
[H0227-S]
- 1 x Tail Shaft.
- 1 x Tail Hub.
- 1 x Set Screws M3x8mm.
Main Linkage
[H0237-S]
Locking Element Tail
[H0249-S]
- 2 x Main Linkage.
- 4 x Plastic Uniball.
- 2 x Locking Element Tail.
- 4 x Socket Head Cap M3x10mm.
- 4 x Finishing Washer M3.
- 4 x Nylon Nut M3.
- 2 x Double Side Tape.
Radius Arm HPS
[H0204BM-S]
- 2 x Radius Arm.
- 2 x Spacer Arm 2.5x4x6.3.
- 2 x Spacer Arm 2.5x4x3mm.
- 2 x Uniball Radius Arm.
- 8 x Flanged Bearing
2.5x 6x2.5.
- 2 x Washer 2.5x4x0.3mm.
- 2 x Socket Head Cap Screw M2.5x15.
- 2 x Socket Head Cap Screw M2.5x18. - 2 x Radius Plastic Arm.
Radius Plastic Arm
[H0205-S]
- 1 x Reference Pin.
Reference Pin
[H1048-S]
Quick Release Canopy
[H1101-S]
- 2 x Quick Release Canopy.
- 2 x Socket Head Cap Screw M3x6 .
Battery Tray
[H1102-S]
- 1 x Plastic Battery Tray.
- 2 x Double side Tape.
- 1 x Battery Protection.
- 4 x Veclo Strap.
Motor Pulley 19T - 26T
[H0015-19-S to H0015-26-S]
- 1 x Motor Pulley.
- 2 x Set Screw M4x4mm.
Page 41
SPARE PARTS