Kraken 580 Manual

8 – Head Assembly
9 – Assembling of the modules
10 – Tail Group Assembly
11 – Tail Boom Assembly
12 – Low Side Frame Installation
13 – Landing Gear Installation
14 – Installation of The Motor
1 – Introduction
2 – Important Notes
3 – Note for Assembly
4 – Carbon Rod Assembly
5 – Transmission Group Assembly
6 – Swashplate Servos Assembly
7 – Frame Group Assembly
INDEX
15 – Installation of The ESC/FBL/RX
16 – Installation of The Batteries
17 – Installation of The Canopy
18 – In flight
19 – Maintenance
20 – Transmission Module
21 – Check list
22 – Spare Parts
http://www.goblin-helicopter.com
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site
www.goblin-helicopter.com for updates and other important information.
VERY IMPORTANT
It is extremely important that you take a moment to register your helicopter with us. This is the only way
to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other
important developments. SAB Heli Division cannot be held responsible for any issues with your model
and will not provide support unless you register your model.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
You will find your serial number on the RED plate of the transmission module and on the product card
included with your kit.
Please take a moment to register your kit online via our web site at:
Page 1
INTRODUCTION