Goblin Fireball Manual

9-10mm
Servo Wire
Page 5
Chapter 4, Main Frame
Tail Servo Assembly
Socket Head Cap
Screws M2.5x8mm
(HC020-S)
Right Main Frame
(H0833-S)
Left Main Frame
(H0832-S)
Tail Servo is a Micro size ( 12x23mm )
(SAB DS12T: Frequency 760ms/560hz)
The distance between the axis and the
ball must be between 9 - 10mm
Servo Screw
(HA065-S) Uniball M2x
4xH3
(H0789-S)
SAB Servo Horn
(HA065-S)
SAB Tail Servo
Included in SG281
(HE019-S)
Tail Servo
Assembly
BAG 1
Socket Head Cap
Screws M2.5x8mm
(HC020-S)
Note:
The tail servo is held in place by the tension created when the main frame is assembled; this means that there is no requirement to attach the servo directly with screws.
The tail servo can be removed by loosening the screw that tensions the frame to the tail boom. There is no requirement to disassemble the frame completely.