Goblin Fireball Manual

1
2
3
SATTELITE
SATTELITE
Page 20
Chapter 14, Flybarless control Unit and RX installation
We suggest the use of a “mini” FBL system.This allows for easier
wire routing considering the small size of this helicopter. Position
1 can be used to install the FBL unit.We recommend using some
type of adhesive to ensure that the plugged connections to the
receiver and FBL unit are secure.
You can with care use a hot glue gun for this purpose.
Position 2 or 3 can be used to install your RX unit.
In accordance with your RX dimension H0900 can be used as support.
Figure 1 and 2 show some example of installation.
Double Side Tape
[HA035]
Double Side Tape
[HA035]
RX Support
[H0900]
RX Support
[H0900]
Double Side Tape
[HA035]
BAG 10
RX
in the Bottom