Goblin Fireball Manual

580mm
170mm
103mm
Page 1
//www.goblin-helicopter.com http:
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site www.goblin-helicopter.com for updates and other important information.
VERY IMPORTANT
In the Manual bag you will find a product card with your serial number. Please take a moment to register
your kit online via our website:
It is extremely important that you take a moment to register your helicopter with us. This is the only way
to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other
important developments. SAB Heli Division cannot be held responsible for issues arising with your model
and will not provide support unless you register your serial number.
The Serial number is also engraved in the Aluminum Main Plate.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
7 – Motor Assembly
8 – Installation of the ESC
9 – Assembly of the Motor
10 – Installation of Tail Belt Tensioner
11 – Installation of Swashplate Servos
12 – Head Sytem
13 – Assembly of the Main Module
1 – Serial Number
2 – Important Notes
3 – Components and Box
4 – Main Frame
5 – Tail System
6 – Installation Of The Boom
INDEX
14 – Flybarless control Unit
and RX installation
15 – Battery and Canopy
16 – Stickers
17 – In flight
18 – Maintenance
19 – Spare Parts
SPECIFICATIONS
Main rotor diameter : 626mm (with 280mm Main Blades)
Tail rotor diameter : 139mm (with 50mm Tail Blades)
Weight including standard electronics: 735g (excluding batteries)
SAB Direct Driver motor included
Micro size servo
50/60 A ESC
Battery compartment: 34x42x75 mm
Chapter 1, Serial Number