User's Manual

EMS User Manual-v2.0.0

Figure - 1 : EMS Roles and Users

Configuration

Configurations are of 2 types:

1) Device Configuration - This configuration determines both the boot time and run-time behavior

of the device. This configuration can be applied per device or for a set of devices. These include

parameters for all the different submodules which can be changed etc. (eg. STLIP IP

Address/Port, MPE PID etc.)

2) Alarm configurations - These define the alarm ID linked to the alarm with custom settings for

severity from one of the INFO, WARNING, MINOR, MAJOR, CRITICAL and allowed actions from

ACKNOWLEDGE. Alarms could be set to auto acknowledge by users in which case they do not

show up on the dashboard and are directly logged in the audit logs.

Provisioning

Provisioning defines the various user roles and adds device to the list of allowed devices on the network

as per the hierarchy shown in Figure 1