User's Manual

EMS User Manual-v2.0.0

Updating Runtime Configs

Runtime configuration of a BRH device can be upgraded through an action provided on “BRH Devices”

Page.

The following RF Transmission parameters can be updated during runtime once the device has connected

to EMS:

● Transmission Power can be configured between 37dbm/5Watt and 30dbm/1Watt.

● Transmission Frequency(Mhz) can be configured to 725.0 Mhz.

● RF Transmission can be configured to "on" to enable RF transmissions or "off" to mute RF

transmissions.

1) Go to “BRH Devices” Page and Open device specific Context Menu and click “Runtime

Configuration”, a Dialog will appear.

2) Click on “Update Configuration” after selecting the right frequency and Power Level.