User's Manual

EMS User Manual-v2.0.0
Boot-up the Device
Once the device is provisioned, it is ready to be connected to the network. Power on the device and
ensure that the device has network connectivity. The device should initiate contact with the EMS server.
The change in the states of the device is observed on the status icon as shown in Figure above.
Wait for the icon to turn green indicating device is now functional
When the device is operational, Device Status, Serial No., MAC ID, Reboot Counts, Location and
Active/Standby software versions of the device are shown on EMS as below -
Copyright Saankhya Labs Private Ltd, Bangalore 15