User's Manual

EMS User Manual-v2.0.0

Table 2: Boot Time Configuration Options

Provision a Device

1) Navigate to Provisioning -> Devices submenu and click on the + icon as shown below

2) Add the relevant device information as shown below

FCC

Configuration

CW mode

"off"

"on"

When CW mode is "off"

the BRH unit will

transmit an ATSC3.0

signal.

When CW mode is "on"

the BRH unit will

transmit a continuous

waveform signal with

center frequency

725Mhz; With

transmission power

fixed at 37dbm/5Watt.