User's Manual

SL-TVWS-1001-User Manual and Installation Guide

10) FCC Test Mode

In this mode device continuously transmits without any quite period. It is supported as per the FCC test

requirements. In this mode ACLR and transmit power can be measured more accurately.

11.1 FCC test for Base Station

11.1.1 Switch to FCC mode

Connect TVWS GUI Application to Base Station and follow the steps indicated in Figure 24 to configure

the device to FCC test Mode. Please make sure TVWS DB Query is disabled for FCC testing.

Use the TVWS DB Query dropdown in Device-Config section to disable the TVWS DB Query.

Figure 24 Switch BS to FCC test mode

11.1.2 Trigger Device in FCC mode

Follow the steps indicated in Figure 25 to trigger the device in FCC mode.