User's Manual

SL-TVWS-1001-User Manual and Installation Guide

3) Depending on the Bandwidth selected, the frequency bands will increment by multiples of the

bandwidth

Figure 21 Additional CPE configurations

9.3 Scan for Available Networks

On applying the configurations above, CPE starts scanning for available networks. It might take a while

depending on the range of scan. For entire TV band it might take as long as 15-20 minutes. Once the scan

is complete, the following pop-up shows up:

Figure 22 Frequency selection at CPE

In case there are multiple networks shown, select the desired frequency to register with the network. It

takes a while (about 5minutes) to complete the registration and on successful registration, CPE moves to

operational mode

Notes: