User's Manual

SL-TVWS-1001-User Manual and Installation Guide

Figure 11: List of available configuration files

Before applying the configuration to the device (using the ‘Apply’ button as shown in Figure 9) please

double check the following:

▪ TVWSDB Query is set to Enabled

▪ The location co-ordinates are correct or if using GPS, it is in locked state (using the LED status)

▪ The Antenna Height above ground level (AGL)

▪ The range of channels is set appropriately. The start and the stop bands increment in multiples

of the selected bandwidth

▪ The bandwidth is selected correctly

It takes a while (about 60 seconds) for the configuration to be applied and a message is displayed at

the bottom of the TVWS GUI application.