User's Manual

SL-TVWS-1001-User Manual and Installation Guide

Figure 10 Location Data source selection

Configuration files are provided for devices with following naming convention:

<Duplex Mode>_<Device Type>_<Description>_<GI length>_<Bandwidth>_<Device Model>_<Antenna

Gain>.ini where

Duplex Mode: TDD or FDD

Device Type: BS or CPE

GI length is the length of cyclic prefix in terms of symbol size (1by32, 1by16, 1by8, 1by4)

Bandwidth: 6MHz or 8MHz

Device Model: Dhaval2p1 or Dhaval3p1

Antenna Gain: (0 dBi, 6 dBi, 9 dBi)

For use with 6MHz channel, the suggested profile is TDD_BS_TPC-DSM-SCU_1by4_6MHz.ini whereas for

8MHz channel it is TDD_BS_TPC-DSM-SCU_1by16_8MHz.ini. These files are available in

“C:\Users\<profile>\.saankhya\.atconfig”. Refer to Figure 11 for list of configuration files. At this stage the

configuration is loaded into the TVWS internal database but not applied to the device. Follow the steps

indicated in Figure 12.