User's Manual

SL-TVWS-1001-User Manual and Installation Guide
Copyright Saankhya Labs Private Ltd, Bangalore
On successful connection to the device, the following screen appears please note the 3 important points
marked on the screenshot
Figure 9 TVWS BS Opening Screen
Notes:
8) All devices are shipped in ‘Installation’ mode. In this mode, the device radios are not turned on unless
user applies a valid configuration
9) On successful application of configuration, device moves to ‘Operational’ mode. No parameter change
is allowed in this state
7.4 Configure the BS device
Before we load the configuration files, please check that the selected source of location information
shows GPS on the GUI. Please ensure that the GPS is latched on by checking the appropriate LED at the
bottom of device. Use of GPS for geolocation is mandatory on devices certified under FCC.
The above steps are to be performed by a professional installer conversant with the operations of the
device.