User's Manual

SL-TVWS-1001-User Manual and Installation Guide

Figure 7 Provisioning Base station with TVWS GUI

On successful provisioning, a message is displayed in the log window at the bottom. Also ensure that the

DB query parameter as shown in above figure is set to enabled.

7.3 Discover BS devices

After provisioning, we need to connect to the device and apply configuration and start the radios. The

devices can be discovered if they are on the same IPv4 subnet as that of the PC running the TVWS

Application. Follow the steps in Figure 8 to discover the devices. Once discovered, select the device based

on the MAC address

Figure 8 Discovering TVWS devices