User's Manual

SL-TVWS-1001-User Manual and Installation Guide

Figure 4 Saankhya TVWS Device

Notes:

1) The devices should be mounted vertically with the PoE port facing earth in order to reduce wind

resistance

2) Clamps should be secured firmly in order to avoid any injury or damage resulting from the box slipping

down the pole

7) BS Configuration

Make sure that all the connections are done as described in Section 6) Launch the TVWS GUI Application

by double clicking on the application icon. Follow the steps as described below to configure the base

station

7.1 Configure a WSDB provider

Note:

3) This step is optional and required only if TVWS databases need to be accessed. Otherwise go directly

to Section 7.3 (at locations where WSDB services are not mandated by law)