User's Manual

Sipeed Technology
3
/
8
Sipeed M1w User Manual v1.0
SOFTWARE FEATURES
FreeRtos & Standard SDK Support FreeRtos and Standrad development kit.
MicroPython Support Support MicroPython on M1
Machine vision Machine vision based on convolutional neural network
Machine hearing High performance microphone array processor
HARDWARE FEATURES
Supply voltage of external power supply 4.8V ~ 5.2V
Supply current of external power supply >600mA
Temperature rise <30K
Range of working temperature -30℃ ~ 85℃
RF FEATURES
MCU : ESP8285 Tensilica L106 32-bit MCU
Wireless Standard 802.11 b/g/n
Frequency Range 2400Mhz - 2483.5Mhz
TX Power(Conduction test)
802.11.b : +15dBm(±2dBm)
802.11.g : +10dBm(±2dBm)(54Mbps)
802.11.n : +10dBm(±2dBm) (65Mbps)
Antenna Connector IPEX 3.0x3.0mm
Wi-Fi mode Station/SoftAP/SoftAP+Station
Power up the device,first time setup with MaixPy in K210
1.Connecting hardware
Connect TXD, RXD, 5V, GND with computer by USB-TTL
module
2.Using the serial port tool
LINUX:
Use minicom ore screen tool
Minicom:
sudo apt update
sudo apt install minicom
sudo minicom -s
# Then set the serial port number according to the
prompt and the baud rate is 115200. Do not know how
to search using the search tool.
# Set Backspace to DEL function
# Set linewrap to Yes
sudo minicom