Datasheet

G
RHEASREG
®
SW Rev. 2017 - V12 GB
Mechanical paddle flow monitor RHEASREG
®
SW . This flow sensor is applicable for flow monitoring of liquid and gaseous non-aggressive media in
pipes and in hydraulic systems from ½'' through ¾'' up to 8" in diameter, furthermore used as flow control instrument or as water failure protection
switch, e.g. for pumps in oil circulation and cooling systems, in evaporators, compressors and heat exchangers, with brass or stainless steel body.
TECHNICAL DATA
Switching capacity: 15 (8) A; 24…250 V AC,
at 24 V AC min. 150 mA
Contact: dustproof microswitch as potential-free
single-pole changeover contact
Enclosure: plastic, material polyamide, 30 % glass-globe-reinforced,
colour traffic white (similar to RAL 9016)
Dimensions: 108 x 70 x 73.5 mm (Thor 2)
Base body: galvanised steel
Screwed socket: brass or stainless steel (see table)
Paddle: stainless steel, V4A (1.4401)
Cable gland: M 20 x 1.5; including strain relief
Enclosure temperature: –40...+85 °C
Max. temperature of medium: +12 0 ° C
Electrical connection: 0.14 - 1.5 mm
2
, via screw terminals
Protection class: I (according to EN 60 730)
Protection type: IP 65 (according to EN 60 529)
Standards: CE conformity, EMC directive 2014 ⁄ 30 ⁄ EU,
low-voltage directive 2014 ⁄ 35 ⁄ EU
FUNCTION :
Monitor: Contact COM – NO (red – yellow) breaks when flow rate drops to the preset value.
Simultaneously, contact COM – NC (red - blue) closes and can be used as signal contact.
Device is factory-set to the minimum switch-off value,
which can be increased by turning the range adjusting screw clockwise.
Installation: vertical in horizontal pipes, tee R x'' according to DIN 2950,
min. smoothing distance = 5 x pipe diameter upstream and downstream of paddle
RHEASREG
®
SW – Flow monitors, mechanical, with paddle
Type ⁄
WG01
Pipe
Ø
DN
Max. Operating
Pressure
PN max Medium
(Contacting Incl. attached
Parts Tee Fitting
Made of) according to DIN 2950 Item No.
SW
SW-1E 1'' - 8 '' 11 bar normal (brass) – 1702-3011-0000-000
SW-2E 1'' - 8 ''
30 bar aggressive (stainless steel, V4A) – 1702-3012-0101-000
SW-3E ½''
11 bar normal (brass) ▯ 1702-3013-0031-000
SW-4E ¾''
11 bar normal (brass) ▯ 1702-3014-0041-000
Spare part
PSW-09
Set of stainless steel paddles 1- 8 " (4 pieces) 7700-0010-1000-000
Note:
Z = Fourth paddle included in the scope of delivery to be used in addition to
the three paddles already factory-mounted ( 1, 2, 3 plus 4 )!