Datasheet

G
KINASGARD
®
ABWF ⁄ LF Rev. 2017 - V12 GB
The room motion and light sensor and presence detector KINASGARD
®
ABWF ⁄ LF
is a combined instrument that detects motions and light intensity as well as the
presence of persons and is used to recognize conditions. ABWF ⁄ LF issues a standard
signal of 0 - 10 V or 4...20 mA for light intensity and has a switching (changeover
contact) output for the detection of motions. The motion sensor ⁄ presence detector
detects the presence of persons and motions. It is used to monitor and recognise
conditions and for motion-dependent control of room functions, e.g. as a motion
detector to lower temperatures in unused rooms. The motion sensor is used in
corridors, in outdoor areas, in industrial halls, in offices, residential rooms and
business facilities. The light intensity sensor ⁄ twilight sensor with six switchable
measuring ranges (six devices in one) measures the luminous intensity and is used
to control luminaries, lighting systems, Venetian blinds and canvas blinds, etc., to
monitor lighting conditions at workplaces, in greenhouses, storage halls, workshops,
corridors, in outdoor areas, in industrial halls, in offices as well as in residential and
business facilities, for daylight-dependant constant light control, as light intensity or
twilight sensor and to control sunshade equipment avoiding unnecessary heating-up
of rooms.
TECHNICAL DATA
Power supply: 24 V AC (± 20 %); 15...36 V DC for U variant
15...36 V DC for I variant, depending on working resistance,
residual ripple stabilised ± 0.3 V
Working resistance: R
a
(ohm) = (U
b
-14 V) ⁄ 0.02 A for I variant
Load resistance: R
L
> 5 kOhm for U variant
Power consumption: < 1 W at 24 V DC; < 2 VA at 24 V AC
Sensor: infra-red motion sensor and light sensor
Output, motion sensor: without ⁄ with motion + presence, potential-free
normally open contact (24 V), 1 A ohmic load
After-running time: adjustable from 4 s to 16 min
Measuring ranges:
multi-range switching (via DIP switches)
with 6 switchable measuring ranges
0…500 Lux ⁄ 1 kLux ⁄ 2 kLux ⁄ 5 kLux ⁄ 20 kLux ⁄ 60 kLux
(other individual ranges optional, e. g. 100 kLux)
Output: 0 -10 V (linearised, active,
3-wire connection) or 4...20 mA
Measuring error: < 5 % of final value
Ambient temperature: –10...+50 °C;
AHKF –30...+70 °C
Electrical connection: 0.14 - 1.5 mm², via terminal screws on circuit board
Enclosure:
plastic, material polyamide, 30 % glass-globe-reinforced,
with quick-locking screws (slotted ⁄ Phillips head
combination), colour traffic white (similar to RAL 9016),
enclosure cover for AHKF is transparent!
Dimensions: 72 x 64 x 37.8 mm (
ABWF ⁄ LF, ABWF )
72 x 64 x 43.3 mm ( AHKF )
Cable gland: M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
Installation: on-wall
Protection class: III (according to EN 60 730)
Protection type: IP 30 (according to EN 60 529)
Standards: CE conformity, electromagnetic compatibility
according to EN 61 326, EMC directive 2014 ⁄ 30 ⁄ EU
Schematic diagram
ABWF ⁄ LF
Connecting diagram ABWF ⁄ LF
Measuring ranges
(selectable)
DIP
1
DIP
2
DIP
3
DIP
4
0…500 Lux OFF OFF OFF –
0… 1 kLux
O N OFF OFF –
0… 2 kLux OFF
O N OFF –
0… 5 kLux
O N O N OFF –
0… 20 kLux OFF OFF
O N –
0… 60 kLux
O N OFF O N –
1
2
3
13
11
12
UB- GND
UB+ supply voltage 24V AC/DC
Output light intensity 0-10V (linearised)
Breaker
Normally
open contact
changeover
(24 V)
Type ⁄ WG01 Detection, Measuring Range Output Item No.
ABWF ⁄ LF Room motion sensor and light sensor
ABWF-LF-U
Presence + Motion: Yes ⁄ No (relay on ⁄ off) Changeover contact
1401-1111-2100-000
Light Intensity: 0...500 Lux / 1 / 2 / 5 / 20 / 60 kLux 0 – 10 V (linearised)
ABWF-LF-I
Presence + Motion: Yes ⁄ No (relay on ⁄ off) Changeover contact
1401-1111-3200-000
Light Intensity: 0…500 Lux / 1 / 2 / 5 / 20 / 60 kLux 4...20 mA (linearised)
ABWF Room motion sensor
ABWF-W Presence + Motion: Yes ⁄ No (relay on ⁄ off) Changeover contact 1401-1110-4000-000
AHKF Room light intensity sensors
AHKF-I Light Intensity: 0...500 Lux / 1 / 2 / 5 / 20 / 60 kLux 4...20 mA (linearised) 1601-1112-1000-000
AHKF-U Light Intensity:
0..500 Lux / 1 / 2 / 5 / 20 / 60 kLux 0 – 10 V (linearised) 1601-1111-1000-000
1 2 3 13 11 12
4'' 16'
time
min. max.
offset
1234
ON
UB+ 24V AC/DC
Output Light Intensity in lux
UB- GND
Normally
open contact
Breaker
Plug for presence detector