Manualshelf

User Manual

ManualsBrandsS&S Cycle ManualsFor motorcyclesTri-Glide Header Adapter 2009-2011 Harley-Davidson
12
2
INSTALLATION OF ADAPTER KIT ON POWER TUNE HEADERS
1- Install the Power Tune header as instructed.
2- Install the provided clamps over the ared end of the extension tubes.
3- Slide the extension tubes onto the ends of the Power Tune Header, do not tighten clamps at this time.
4- Install the muers onto the ends of the extension tubes and tighten the hanger bracket bolts.
5- Adjust alignment of the muers then tighten both sets of clamps.
6- Before operating the motorcycle, clean the pipes and muers with soap and water or window cleaner. Any grease or oil will permanently burn
onto the pipes. Dry thoroughly.