Manual
7
See Pictures 5 & 6.
NOTES:
Plug Hole D with 50-8331 ⁄-27 pipe plug if primary belt drive is used.
Hole D and tting 31-2019 may be used to return top end oil in engines equipped with external oil return lines. Connect oil return lines from front and
rear cylinder heads with “T” tting. Install tting S&S® 31-2019 in hole D and route remaining line from “T” to this tting. Breather gear will draw oil from
heads into gear case where oil pump can return it to oil tank.
See Pictures 3, 4, 5 & 6.
See Line Drawing, item 33
Oil on tires or brakes may cause loss of control of motorcycle resulting in serious injury to operator and others.
NOTE: Installation of 31-2020 tting may not be possible on chassis with mechanical rear brakes due to clearance problems.
See Picture 10.
WARNING
Picture 10