Manual
2
INTRODUCTION
NOTE: S&S crankcases are sold in matched sets only. Individual case halves are not available.
KIT CONTENTS:
Left and right main bearing races (right race is nal honed and size is
marked on tag wired to cases).
31-4008 bushing, oil pump drive shaft (bushing is reamed).
31-4009 bearing assembly., cam needle.
8 studs, cylinder (studs installed are appropriate part for type of cases
ordered).
31-2006 plug, magnetic drain.
31-2037 shaft, circuit breaker drive gear (1936 to ’69 cases).
31-2039 shaft, idler gear (1936 to ’69 cases).
One set of S&S big twin crankcase bolts (less two bolts, washers and
nuts used to hold cases together for shipping).
One 31-4013 bearing assembly, left main (less races installed by S&S).
Assorted loose hardware and several hardware packages in the
following congurations:
1936 to 1947 big twins
1948 to 1964 big twins
1965 to 1969 big twins
1970 to 1984 big twins
1984 to present big twins
Installation instructions.
Certicate of origin.
C.A.R.B. approved sticker (crankcases 31-0000, 31-0003, 31-0005, and
31-0012, 31-0052, 31-0055) See Step #8.
POLISHING, PAINTING, PLATING OR POWDERCOATING S&S CASES