Manual

8
Using Adjustable Pushrods
NOTE: S&S® adjustable pushrods have 32 threads per inch, and 24 ats
willplacethe pushrodin theoptimalpositionofthestockstyle tappet. If
pushrods other than S&S adjustable or quickee’s are used, refer to the
manufacturer’sinstructionsheetstondthenumberofatsneeded.
NOTE: Thetappetsmaybenoisyuponinitialstart-upafterinstallingcams.
Thisisnormalafterthetappetshaveallbeenbleddown,andwillgoaway
shortlyaslongastheproperoilpressureisavailable.
If the engine is rotated before the tappets have bled down and the
pushrods can be rotated by hand, valve to valve or valve to piston
contact may occur. Serious engine damage could result.
Picture 15
Picture 16
7
6
4
10
8
1
9
2
3
CAUTION