Owner manual

2
Introduction and Specications

NOTES:
 2005-up stock valve springs will handle camshafts with lift up to 0.585". If a camshaft with higher lift is installed, high performance valve springs
capable of handling a greater lift must be used.
 A cam with over 0.585” of lift will cause interference between the valve spring top collar and the valve seal with stock valve springs.
 Piston to valve clearance will need to be conrmed when using a cam with over 0.585" of lift. Clearance should be at least 0.060" intake and .080"
exhaust.
 Valve to valve clearance will need to be conrmed when using a cam over 0.585" lift. Clearance should be a minimum of 0.060".
 Installation of S&S chain drive cams requires special tools. See Picture 1 for the required tools. Attempting the cam change operation without these
tools will be dicult. Damage can result which will not be covered under warranty.
 Possible failure may result if thread locking compound is not applied to the cam drive sprocket ange bolts. Always prepare threads according to the
instructions on the container.
 All reference to Harley-Davidson part numbers is for identication purposes only. We in no way are implying that any of S&S Cycle’s products are
original equipment parts or that they are equivalent to the corresponding Harley-Davidson part numbers.
Contents Of Chain Drive Camshaft Kit 106-5929:
 
 
 
 
 
 
 
Instruction Contents:




 
 
 
 
 
Cam Name Lobe
Timing
Duration Lift Centerline
TDC
Valve Lift
05-UP Models Works
with stock valve springs
Works with
stock pushrods
 
510C
Int 20° 38° 238°

99°  
X X
 52° 20° 252° 106°  
551C 
Int 17° 19° 216°

91°  
X X
 41° 17 ° 238° 102°  
557
Int 6° 27° 212°

100°  
X X
 39° 12° 231° 103°  
570C 
Int 20° 40° 240°

100°  
X X
 55° 20° 255°    
583C 
Int 5° 18° 203°

    
X X
 58° 24° 262° 107°  
585C 
Int 20° 45° 245°

   
X X
 60° 20° 260° 110 °  
625C 
Int 20° 55° 255°

    
 60° 20° 260° 110 °  
635
Int     243°

102°  
     276°    
640C 
Int 25° 60° 265°

    
 65° 25° 270° 110 °  

Int 20° 49° 249°

°  
X X
 45° 26° 251°    
MR103
Int 13° 33° 226°

100°  
X X
 50° 22° 252° 104°  
Complete Chain Drive Camshaft Kit