Emission-Related User Manual


Throttle Requirements
NOTE: S&S Super E & G carburetors require the use of a two cable, pull open - pull closed throttle assembly. All models equipped with a single cable throttle
mechanism must be converted to the two cable, pull open - pull closed type. S&S oers a variety of these throttle assemblies.
Single, braided wire cable throttle mechanisms cannot mechanically close the throttle. If the throttle inadvertently sticks in the open
position, loss of control of motorcycle and personal injury to you or others may result.




Optional S&S Two Cable Throttle Kits





 
NOTE: 1981 to 1990 OEM style cables may be used as replacement cables for throttle kits above.
 
 
 

 

 
 
 
 

 
 
 


NOTE: Throttle grip assembly must be assembled correctly and work freely to prevent possible sticking during operation. Cable routing must be free of
tight bends to minimize cable to cable housing friction. Throttle must not bind and must snap shut to fully closed position when released.
Incorrect cable adjustment may cause throttle to stick open, causing loss of control of motorcycle, serious injury or death.
WARNING
 
 
 
WARNING