Manual

2
2. Place left and right foam bottom packing blocks in the bottom of the crate. Note the indent on the left block for the sprocket shaft of the
engine. See Pictures 2 and 3 above.
3. Place front and rear foam packing blocks in the crate as shown above. It may be necessary to trim the front block for generator style engines.
See Picture 4 below.
NOTE: These blocks will not be used for Harley-Davidson® Twin Cam 88B™ or other Harley-Davidson engines with internal balancers.
4. For generator style engines, cut a clearance notch for the generator gear case.
Picture 2 Picture 3
Picture 4