Brochure

Choosing the correct size HR for your home is easy, all you

need to know is the square footage.

If your home is up to:

2300 Sq. Ft. you need a HR100V

3400 Sq. Ft. you need a HR160H

5000 Sq. Ft. you need a HR220H

Choosing the Right Size HR

S&P’s HRV System

• Duotrol

Systems: Selects ventilation modes (OFF, CONT or INTER), and adjusts the

continuous airow rates: Increasing (+)/Decreasing (-).

• Motors(2): Designed with high performance and reliability, they are maintenance free for comfort

and peace of mind.

• Synthetic Filters: Capture the largest particles & protect the heat recovery core from potential

obstruction by these particles.

• Heat Recovery Core: A polypropylene cross-ow type, it is designed to transfer the heat

between the exhaust & supply air streams without allowing any contamination or mixing of the

streams. This maximizes the efciency and improves indoor air quality.

• Condensate Drain Pan & Drainage Hose: Captures the water that accumulates during the heat

transfer and defrost sequence in the fall, winter & early spring seasons. Drain hose is connected

to the drain pan and serves as drainage for the accumulated water. It is normal during summer

months to nd no condensation in drain pan or in drainage hose.

• Automatic Defrost Sequence: The defrost sequence is electronically controlled by measuring

the temperature of the incoming outdoor air. The sequence is activated at 23°F (-5°C) with a ve

minute duration, then returns to normal operation for 25 minutes. This keeps the heat recovery

core from ice build-ups or freezing.

• Defrost sequence: Supply fan shuts down, and the exhaust fan speed increases depending on

the outside air temperature.

HR Series Specics

S&P Heat Recovery Ventilators (HRVs)