User's Manual

E-14
Listening to USB mass storage device/MP3 player
USB
Note:
-
tems from USB mass storage device or MP3 player.
To play back USB/MP3 player with folder
mode on / off
1 Press the FUNCTION button (main unit) repeatedly to
select USB function. Connect the USB memory device
USB memory is connected to the main unit, the device
information will be displayed.
To playback with folder mode on, follow step 2 below.
To playback with folder mode off, skip to step 3 below.
2 Press the FOLDER button, and press the PRESET ( or
) button to select desired playback folder. To start play-
back, go to step 4. To change the playback folder, press
the PRESET ( or ) button to select another folder.
3
or button.
4 Press the / (USB / ) button. Playback will start and
Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
Press the
/ (USB / ) button.
To remove USB memory device
1 Press the button twice to stop playback.
2 Disconnect USB memory device from the USB terminal.
Notes:
SHARP will not be held liable for the loss of data while the
USB memory device is connected to the audio system.
Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory de-
vices will work on this audio system.
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC
connection.
External HDD-storage cannot be played back via USB
terminal.
If the data inside the USB memory is large, it may take
longer time for the data to be read.
-
-
-
will take a few seconds. If abnormal indications appear
unit and then turn it on again.
This product relates to USB mass storage devices
and MP3 players. It may however face some irregu-
larities due to various unforeseen reasons from some
devices. Should this happen, turn off the unit and then
turn it on again.
MP3 player will not be charging in other than USB
function. However, charging ability depends on type of
MP3 player used.
The following functions are the same as CD operations:
Page
Various disc functions.................................................12
Random play.................................................................12
Repeat play .................................................................. 13
Programmed play (MP3/WMA) ................................... 13
Notes:
If USB memory device is not connected, “USB No Me-
dia” will be shown on the display.
Fast forward/reverse is invalid when playing back a
Notes:
This unit only supports “MPEG-1 Audio Layer-3” for-
mat. (Sampling Frequency is 32, 44.1, 48kHz)
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
Files without MP3/WMA format cannot be played back.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to
32 characters.
Total number of folders read is 999 including folder
The display playback time may not be displayed cor-
WMA meta tag also supports title, artist and album
-
This USB terminal cannot be
connected to PC. To connect to
PC, please use the PC IN terminal
on the rear panel.