User's Manual

E-19
Troubleshooting chart (continued)
■ Factory reset, clearing all memory
1 3ress the ONSTAN'%< Eutton to turn the power on.
2 3ress FUN&TION Eutton Pain unit repeatedl\ or
AU'IO/INE IN3UT Eutton rePote control to enter
Audio In Pode.
3 3ress Eutton Pain unit once.
4 3ress and hold Eutton Pain unit until “RESET” appears.
Caution:
This operation will erase all data stored in PePor\ includ-
ing clocN tiPer settings and tuner preset.
■ Before transporting the unit
RePove all devices connected to the unit. Then set the
unit to the power standE\ Pode. &arr\ing the unit with
other devices left connected or discs left inside Pight daP-
age the unit.
■ Care of discs
'iscs are fairl\ resistant to daPage. +owever PistracNing
can occur due to accuPulation of dirt on the surface.
● 'o not ParN on the non-laEel side of the disc froP which
signals are read.
● .eep \our discs awa\ froP direct sunlight heat and
excessive Poisture.
● Alwa\s hold the discs E\ the edges. Fingerprints dirt
or water on the &'s can cause noise or PistracNing.
&lean it with a soft dr\ cloth wiping straight out froP the
center along the radius.
Maintenance
■ Cleaning the cabinet
3eriodicall\ wipe the caEinet with a soft cloth and a diluted
soap solution then with a dr\ cloth.
Caution:
● 'o not use chePicals for cleaning gasoline paint thin-
ner etc.. It Pa\ daPage the caEinet.
● 'o not appl\ oil to the inside of the unit. It Pa\ cause
Palfunctions.
■ Cleaning the CD pickup lens
In order to ensure proper operation of the &' pla\er
preventative Paintenance cleaning of the laser picNup
lens should Ee perforPed peridicall\. /ens cleaners are
coPPerciali availaEle. &ontact \our local &' software
dealer for options.
Speci¿cations
As part of our polic\ of continuous iPprovePent S+AR3
reserves the right to PaNe design and speci¿cation chang-
es for product iPprovePent without prior notice. The per-
forPance speci¿cation ¿gures indicated are noPinal val-
ues of production units. There Pa\ Ee soPe deviations
froP these values in individual unit.
■ General
Power source A& 1 - 4 9 a 6 +]
Power
consumption
3ower on  W
Dimensions Width 8 - 1” 16 PP
+eight  - 4” 6 PP
'epth 11 - 14” 8 PP
Weight 4.6 lEs. .1 Ng
Bluetooth
frequency band
.4*+] - .48*+]
Compatible
Bluetooth Pro¿le
A'3 Advanced Audio 'istriEution
3ro¿le A9R&3
Audio9ideo
RePote &ontrol 3ro¿le
Bluetooth .1 E'R
■ Ampli¿er
Output power
RMS: Total 50 W (25 W per
channel into 6 ohms at 1
kHz, 10% T.H.D.)
FTC: 19 W minimum RMS per
channel into 6 ohms from
20 Hz to 20 kHz, 1% T.H.D.
Output terminals SpeaNers 6 ohPs
+] - N+]
SuEwoofer 3re-out audio signal
 P91 N ohPs at  +]
+eadphones 16 -  ohPs
recoPPended  ohPs
Input terminals Audio In audio signal
 P94 N ohPs
/ine in Analogue input
 P94 N ohPs