User's Manual

E-16
Timer and sleep operation (Remote control only) (continued)
12 When the preset tiPe is reached pla\EacN will start. The
voluPe will increase graduall\ until it reaches the preset
voluPe. The tiPer indicator will ElinN during tiPer pla\-
EacN.
13 When the tiPer end tiPe is reached the s\steP will
enter the power standE\ Pode autoPaticall\.
Once timer:
The tiPer will Ee canceled.
Daily timer:
The tiPer operates at the saPe tiPe ever\ selected
da\. &ancel the dail\ tiPer when it is not in use.
Notes:
● When perforPing tiPer pla\EacN using another unit
connected to the US% terPinal or AU'I2 IN MacN se-
lect “US%” or “AU'I2 IN” or “/INE IN” in step . This
unit will turn on or enter the power standE\ Pode au-
toPaticall\. +owever the connected unit will not turn
on or off.
● To stop the tiPer pla\E
acN follow step “Cancelling
the timer setting” of this page.
Checking the timer setting:
1 Turn the power on. 3ress and hold the &/2&.TIMER
Eutton.
2 Within 1 seconds press the or Eutton to select
“2nce” or “'ail\” and press the ENTER Eutton.
3 Within 1 seconds press the or Eutton to select
“TiPer &all” and press the ENTER Eutton.
Cancelling the timer setting:
1 Turn the power on. 3ress and hold the &/2&.TIMER
Eutton.
2 Within 1 seconds press the or Eutton to select
“2nce” or “'ail\” and press the ENTER Eutton.
3 Within 1 seconds press the or Eutton to select
“TiPer 2ff” and press the ENTER Eutton. TiPer will Ee
canceled the setting will not Ee canceled.
Reusing the memorized timer setting:
The tiPer setting will Ee PePori]ed once it is entered. To
reuse the saPe setting perforP the following operations.
1 Turn the power on. 3ress and hold the &/2&.TIMER
Eutton.
2 Within 1 seconds press the or Eutton to select
“2nce” or “'ail\” and press the ENTER Eutton.
3 Within 1 seconds press the or Eutton to select
“TiPer 2n”  and press the ENTER Eutton.
4 3ress the 2NSTAN'%< Eutton to enter the power
standE\ Pode.
■ Sleep operation
The radio disc US% Audio In and /ine In can all Ee
turned off autoPaticall\.
1 3la\ EacN the desired sound source.
2 3ress the S/EE3 Eutton.
3 Within  seconds press the S/EE3 Eutton repeatedl\
to select the tiPe.
“Sleep ”
“Sleep 8” ... “Sleep 1”
“Sleep Off”
4 “S/EE3” indicator will appear.
5 The unit will enter the power standE\ Pode
autoPaticall\ after the preset tiPe has elapsed. The
voluPe will Ee turned down 1 Pinute Eefore the sleep
operation ¿nishes.
To con¿rm the remaining sleep time:
1 While “S/EE3” is indicated press the S/EE3 Eutton.
To cancel the sleep operation:
3ress the ONSTAN'%< Eutton while “S/EE3” is indicated.
To cancel the sleep operation without setting the unit to the
standE\ Pode proceed as follows.
1 While “S/EE3” is indicated press the S/EE3 Eutton.
2 Within  seconds press the S/EE3 Eutton repeatedl\
until “Sleep Off” appears.
■ To use timer and sleep operation together
Sleep and timer playback:
For exaPple \ou can fall asleep listening to the radio and
waNe up to &' the next Porning.
1 Set the sleep tiPe see aEove steps 1 - .
2 While the sleep tiPer is set set the tiPer pla\EacN
steps  -  page 1.
Sleep tiPer
setting
TiPer pla\EacN
setting
'esired tiPe
1- Pinutes
Sleep operation will
autoPaticall\ stop
TiPer pla\EacN start
tiPe
End tiPe