User manual

12 x

pH test (M)

For fresh and salt water

Test preparation:

1 Fill both tubes up to the mark with the test water.

2 Add 12 drops of pH-(M) to one of the two tubes

(test), close with the screw top lid and mix.

Measuring with AQUA-CHECK:

1 Reference measurement.

2 Test measurement.

You will nd important information on your measurement value at www.aqua-check.de.

Please observe the safety notes for handling chemicals (see rear).

AQUA-CHECKAQUA-CHECK

www.aqua-check.de

PAGE 1
pH pH test (M) For fresh and salt water Test preparation: 1 Fill both tubes up to the mark with the test water. R1 2 Add 12 drops of pH-(M) to one of the two tubes (test), close with the screw top lid and mix. 12 x ck.d e AQUA -che qua ww w.a 1 Reference measurement. -CHE CK Measuring with AQUA-CHECK: 2 Test measurement. You will find important information on your measurement value at www.aqua-check.de. Please observe the safety notes for handling chemicals (see rear).
PAGE 2
pH pH test (M) Version 1.0 • 03/2012 pH (M) - (pH test) Take packaging with product residues to hazardous or special waste disposal. CLHM2-16001 R10: Flammable. S2: Keep out of the reach of children. S7: Keep container tightly closed. S16: Keep away from sources of ignition — No smoking. S46: If swallowed, seek medical advice immediately and show this container or label. Söll GmbH • Fuhrmannstraße 6 • D-95030 Hof • www.soelltec.de • Tel.