Product Manual A

6. On the ground, push the two remaining pole sections together, and place the Topper Pulley
(C) over the unswedged section of the last two pole sections. The Topper Pulley (C) will snap
into place on the Top Pole Section (A).
7. Run the rope around the Pulley on the
Topper Pulley - until the rope is centered
on the Topper Pulley.
8. Using a ladder and a helper, place the two remaining pole sections atop the
standing sections. Be sure to allow both ends of the rope to dangle close
enough to the ground that they can be reached easily.
9. The Rope Cleat (D) can be screwed to the lower section of the pole.
First line up the area where you want to Rope Cleat, then use the
provided self tapping screws to hold the Rope Cleat in place by screwing
the screws in with an electric screw driver. Wrap the rope around the
Rope Cleat to hold the rope securely.
Or
Secure the Rope Cleat (RC) to the lower section of the pole with the 2 pull ties.
The RC is only to hold the Rope from blowing in the wind, not to hold the
weight. Hint:
A stainless steel hose clamp can be added as an upgrade to
hold the RC, (sold separately).
Safety Tips:
Common sense must be used.
When high winds are expected, lower all products on your S&K Pole. This will not only protect your
pole, but will also protect your bird house, flags, gourds or other items being used on your S&K Pole.
Plan ahead: Before erecting your pole, be sure trees will not grow close to it through the years.
S&K Manufacturing, Inc.
1001 Liberty Industrial Drive
O’Fallon, Mo 63366
www.skmfg.com
1-800-764-8688
Fax: [phone]
IF ANY ITEMS ARE DISCOVERED MISSING,
CALL 1-800-764-8688
DO NOT RETURN TO STORE.
5.If adding an S&K American Barn, Great 8, or Heavenly
Haven Purple Martin Houses/Barns to the pole, attach the
Rain Guard to the pulley topper with two snap buttons - in
the placement shown. Ensure the pole’s rope slides through
and lines up with the Guard’s rope opening.
Note: How rope runs through pulley top